Cam Thread  

The update of this page is 09/29/21 ,  Please see the update of each item on each page.

[The feature and a function] 

- this software is the software for creating a cam form data CAF file, in order to process a rope screw and a trapezoid screw with the cam lathe by OKUMA CORP. 

[Appearance] 

[Download] 

Please copy only an executable file into "C:\Program Files\CamThread" after defrosting, and carry out overwrite. 

【 Amendment one's personal history 】 .
Ver.2.22: Shape1 add 3-Lead.
Ver.2.21: 2-Lead Correction of data so that acceleration may be made small.
Ver.2.20: 2-Lead Correction of a display.
Ver.2.19: PC-APT-CAML Ver.2.00 when open COF file, error is fix.
Ver.2.18: WD was added to calculate width.
Ver.2.17: The indication of the gravity acceleration is added.
Ver.2.16: From USB memory start and Key number registration.
Ver.2.15: 2nd running check added.
Ver.2.14: It is changed so that a graphic screen may not disappear.
Ver.2.13: The number of sections of Face Copy is changed to maximum 2828.
Ver.2.12: When the input of the form 2 is done, even a proper form corrects the problem which an error sometimes appears from.
Ver.2.11: The input screen color problem of the form 2 and Face Copy is corrected.
Ver.2.10 : When Exit only chamfers it, what becomes 0 division error is amended.
Ver.2.09: The problem when there is no taper is corrected.
Ver.2.08: It is changed so that it can add taper in the entrance and the exit.
Ver.2.07: Several 768 of the section copy is added.
           : Correction of a color problem of the screen.
Ver.2.05: It is changed to carry out graphic re-drawing automatically at the time of each cancellation.
Ver.2.04: It is changed to check pile of the file when the preservation of the file is done.
Ver.2.03: After it is canceled by the section copy, what becomes an error at the time of graphic re-drawing is amended.
Ver.2.02: The calculation function of the feed is added to its sake in use of a repeat function.
Ver.2.01: It is changed to indicate it when form input data are inputted again.
Ver.2.00 : It is changed from the MS-DOS version to the Windows version.

[ ホーム ] [ 上へ ]